Welcome to Marine Rubber Fender Supplier - ChinaRubberFender.com

contact-info

Floating Dredging Hoses

Features:
1. Outer cover with excellent abrasion resistance and UV protection.
2. Colored indicator layer.
3. Single foam flotation casing to prevent water absorption. The hose emergence above water is not less than 20% of the total volume.
4. High quality, wear resistant rubber.
5. Flange design according to customers' request.
6. Bending angle: in working condition, the bending angle is from 0 to 45.

BASIC INFO Production TESTING PACKAGING CASES

Floating discharge hoses are used with dredgers for silt/gravels conveyance.
The suitable conveyance matters are usually mud, clay, fine sand, fine-mid sand and so on.
The suitable working temperature for floating hose is from -20℃ to +50℃.

With the deep understanding of the floating dredge hoses, the advantages of convenience and stability have been recognized by most of manufacturers. And execution of floating discharge hoses at sea becomes more and more.

View the video about our floating hose production:


Specification:

Inner Diameter(mm) 500 600 700 800 900 1000 110
Working Pressure(Mpa) 1.2 1.5 1.5-2.5 1.5-2.5 1.5-2.5 1.5-2.5 2.5

View production videos about our dredging hose:

Pipe Floater Production

Dredge Hose Production

Self Floating Hose Production

Pipeline Production Workshop

Discharge Hose Workshop

View testing videos about our dredge hose:

Armored Floating Hose Pressure Testing

PE Floater Testing

Prev: