-
Posted: 2019/02/28 | Categories: products knowledge
Wharf: A hydraulic structure for ships to stop, load and unload cargo, and to board visitors. It is the main component of the port. According to the layout of the dock: there are side-by-shore, jetty, ...
-
Posted: 2019/02/13 | Categories: products knowledge
The maintenance of rubber fender of wharf needs to be discontinued to some extent. The fast-paced loading and unloading terminals are not allowed to suspend production for a long time. To properly sol ...
-
Posted: 2019/01/23 | Categories: products knowledge
1.Overload of the ship
This type of damage often occurs in the rubber fender, especially some old rubber fender, which often cracks at the weak part of the structure. The crack is generally in the le ...
-
Posted: 2018/12/20 | Categories: products knowledge
...
-
Posted: 2018/09/26 | Categories: products knowledge
Once the bolt connection in the mechanical equipment is loose, it will cause the bolt to fall off and cause a major safety hazard, or the fatigue life of bolt connection will be greatly shortened due ...
-
Posted: 2018/07/24 | Categories: products knowledge
The primary objective of the rubber fenders on the dock is to absorb collision energy during the berthing process. This in return protects both the ship and the dock after collision. Solid rubber fend ...
-
Posted: 2017/08/20 | Categories: products knowledge
Foam fenders are used to protect ship to ship and ship to dock and providing superior abrasion resistance under the harshest conditions. Compared with the same sized pneumatic fenders, the foam fend ...
-
Posted: 2017/08/18 | Categories: products knowledge
I Type Fender Installation
The following steps are a general method for assembling and installing the I Type fender system. The actual fender design may vary depending on the situation.
1.Check ...
-
Posted: 2017/08/17 | Categories: products knowledge
The following steps are a general method for assembling and installing a cylindrical fender system. The actual fender design may vary depending on the situation.
1.Locate the anchor on the str ...
-
Posted: 2017/08/17 | Categories: products knowledge
/*! elementor - v3.21.0 - 25-04-2024 */
.elementor-widget-text-editor.elementor-drop-cap-view-stacked .elementor-drop-cap{background-color:#69727d;color:#fff} ...
-
Posted: 2017/08/16 | Categories: products knowledge
Arch Fender Installation
The following procedure is common for all types of DEERS V and I-V fender assembly and installation. The actual fender design may vary depending on the situation.
1.Che ...
-
Posted: 2017/08/16 | Categories: products knowledge
As we all know, super arch fender can be divided into two parts, that is type A (SA-A) and type B (SA-B).
Super arch fender type A (SA-A) has two major features as follows: high stress concentration a ...
